Alex Wigen
Alex Wigen
Note: Updated a few missing 3dshapes under the iram
I'd like to order three!
@rene-dev STK554U392A-E looks to be pin compatible, do you have any thoughts on this? https://uk.farnell.com/on-semiconductor/stk554u392a-e/motor-driver-3-phase-ac-15a-sip/dp/2424504
I have opened a pull request using the AccelStepper library: https://github.com/prusa3d/MM-control-01/pull/66 This cleans up a lot but there is still a lot more to do.
Please consider a more general approach which mixes the incoming channels so it is not serial output specific. I've been working on a generic mixer to support RX gyros https://github.com/ExpressLRS/ExpressLRS/pull/2869
> if gyros should be mixed like this, shouldn't one have possibility to use one of the channels as weight as well? That's exactly right, there are two mix output...
@pfeerick said > One think to keep in mind is there is also some interest being able to support a wider output range than 885us to 2135us, specifically 500us to...