atze09

Yes i took that into account, i also tried with less esnsors, but it doesn't work in the current month. But if i scroll back to August it works with...

> Many thanks for your input! Do you think the master version of this might work? https://www.aliexpress.com/item/4000787535232.html Did you try the master version? I have ordered the slave version and...

> The aliexpress interface is a bit weird, I think you select master/slave using the color setting of the product. :-) You are right, i checked my aliexpress and ordered...

Yes i have 4 heat counting devices, 3 Zenner Zelsius C5 ISF M-BUS and one Sensus PolluStat M-Bus hope those will work.

Do you think those will work? -3x Zenner Zelsius C5 ISF (heat meter) -1x Sensus PolluStat (heat meter) -1x Sensus water meter For testing i added both Sensus to the...

Seems are the last 8 digits printed on the meter. I couldn't get a response from:  Now i am setting up a fresh installed raspberry, and connect the M-BUS...

> Great, I am fixing a bug in the code, which is the cause why you do not get a response right now. However it is good to connect a...

> Great, I am fixing a bug in the code, which is the cause why you do not get a response right now. However it is good to connect a...

Thanks for information, i compiled before the pollinterval commit. But i do a reseponse on any of the bps, the telegrams should appear, right under the started config? pi@raspberrypi2:~/wmbusmeters $...

> Ok, can you clone and built this tool: https://github.com/rscada/libmbus When it is compiled, then you can run the scan command: ..../libmbus/bin/mbus-serial-scan -b 2400 /dev/ttyUSB0 and ..../libmbus/libmbus/bin/mbus-serial-scan-secondary -b 2400 /dev/ttyUSB0...