asiantuntija

Started testing out VRR last night and here are some remarks. Using 5700XT, Mesa-git and 5.6 kernel, displays are Asus MG278 and LG27UK650-W. Tests run on workspace with only wallpaper,...

I've been running sway-git and wlroots-git a long time, occasionally trying to start SteamVR and usually seeing crashing or VR view on monitor. After 1.7-RC1 I figured to try again...

I'm dropping in since I'm testing on 6800XT. PowerUPP reads all values correctly but nothing changes when trying to apply something new. `cat /sys/class/hwmon/$(ls -1 /sys/class/drm/card0/device/hwmon)/power1_cap` doesn't show change when...

> > I'm dropping in since I'm testing on 6800XT. PowerUPP reads all values correctly but nothing changes when trying to apply something new. > > `cat /sys/class/hwmon/$(ls -1 /sys/class/drm/card0/device/hwmon)/power1_cap`...

> > After trying the command with sudo it worked and lowered the voltage and changed power limit. Any ideas how to get it work, root not a user of...

I found out that if I close the vrmonitor window first time when it's outputting pink frames, before computer freezes, then start SteamVR again and it works every time. This...

Can't you do just `pgrep hyprlock && command`?

> > Can't you do just `pgrep hyprlock && command`? > > The problem with this is that, lets say 60sec is for screen turn off if hyprlock active, and...

Linux version runs terribly slow atm, I get only around 100 fps while on Windows it's over 300. GPU utilization is around 40% and it used to be maxed, this...

I experience this also and removing VR headset fixed it. Any idea what's going on or do you need more logs perhaps?