artayasa
artayasa
> good idea, but our hal implementation cannot do that. components and their pins are fixed at compiletime. I also support option 4. Hi sir it posible to modif the...
> * [ ] save calib data + HW version in bootloader Hi sir it posible to modif the hardware sir? I want to used only main board with stm32f4,...
> The docs for shaderc mentions that it uses these SDK's This need to instal shaderc sir?? I still confiusd and too hard instal it on win11 always error
> The code example for SimpleFOC is outdated, the library has changed since. The code relating configuring the DRV8305 still works and is also what I use in the Dagor...
> sure，you can try write the code，but only the uart port pin can use for dir/step pin when use full of motor sensor How to implement the step/dir sir? Iam...
> Pinout is the same so should work, overcurrent limit could be set higher because igbt's are 30A max instead of 20A. Thermally i think it would perform similarly. >...
> On second look NTC pin does not exist so igbt temperature would not work and 2 power supply pins are not there you would have to bend following pins...
> On second look NTC pin does not exist so igbt temperature would not work and 2 power supply pins are not there you would have to bend following pins...
> I made some progress but it's still buggy, and needs hardware modification on board. czw., 18 lip 2024, 22:03 użytkownik artayasa ***@***.***> napisał: > […](#) > On second look...
> de Do u have referenso to add step dir comunication?? Imonly know basic of coding sirr🙏🙏