arahasya
arahasya
Hi can anyone explain to a noob like me the project mentioned in the first link I went through the project. Is that micro controller acting as an FPGA here?...
This library is already using DPI output and I am successfully running large display matrix using it. https://github.com/rjrouquette/rgb_matrix_udp
After going through your description looks like you are setting the DPI clock at 40 Mhz. But most of the RGB Panels have driver IC's with 25 Mhz clock. So...
@B-C-Mike just mentioned the link if that can be helpful for your implementation. Your project looks very promising like as you said don't need an external controller. Even tough the...
I had the exact same issues and made it run finally. I can see the desktop now but the keyboard and mouse aren't working. Any ideas?
Help please
I have followed all your recommendations from above. Using tightvncserver and changed version of vncdotool display is 9.7 waveshare IT8951
Hi @joukos Thanks for your comment. I tried the stand alone Rpi method but it doesn't seem to work. This is the output but the screen is blank. `pi@raspberrypi:~ $...
Thanks for this explanation Why have you done (704x3)? Is that considering RGB?
This is my attempt to remove green and blue computations. I have tested this with a single display Works fine when I use panel width up till 4. Get no...