test123

Thanks for these posts, apparently it isn't me. I've been wasting two days on this. I hope one day it'll work, since this is a stopper for me to use...

I tried this one this weekend and works for my application: https://github.com/leeebo/esp_i2c_slave Its a modified version of the arduino one.

Whas this already implemented? I just installed 8.10 but I am getting this error. Exception has occurred: AttributeError module 'ssl' has no attribute 'wrap_socket' File "src/test.py", line 64, in client.connect()...

> It could be the same issue: #400 Yes! Thank you so much for your super fast reply. I set it from 13 to 15 and now it runs again...

Thank you for the extensive answer! I have a mix of different versions of hardware and also different sensors, SHTC3 but also 4. What I noticed after running about 20...

> This is the first time I've heard of this. > In testing and using hundreds of different devices for 4 years, this has never happened. > The settings are...

Then I'm really wondering where this comes from. It happened on multiple devices in the past months all flashed with 4.8 and 4.9. It is slowly getting hard to believe...

Yes, pincode is set. OK, so yours is version B1.9. These were all version B1.5( LYWSD03MMC B1.5, Software Version: 4.9 ). They have the locked OTA firmware and so I...

> Table HW version: https://github.com/pvvx/ATC_MiThermometer?tab=readme-ov-file#chipset-lywsd03mmc-hwb14 > > Different Display controllers and different sensor. > > Does the PIN code also disappear? All settings records are saved in one Flash sector...

Interestingly enough someone else reported this some time ago already but it was apparently assumed fixed since he tested it with an earlier firmware version: https://github.com/pvvx/ATC_MiThermometer/issues/585 I do remember someone...