antonmeyer

just as comment, without deeper knowledge of the details: complex operations should not be done at the vzlogger. it will end up in a configuration jungle. A similar, and might...

> @antonmeyer: > i don't understand why you feel the need to _discourage_ adding a feature, without having contributed anything. > (while also actually requesting a subset of this feature...

"... always called "value", A: when you use the querybuilder you might endup in having the column named "value" for different kind of sensors. having meaningful names to the fields...

Hi Matze, I moved away from volkszähler and wrote my own SML2InfluxDB. By that the serial channel is complete flexible by decoding the meter ID from the SML an uses...

I'm not sure if I got the meaning of the question in the right way. If it is about the name of the parameter, I'm not picky. What ever fits...

"influxdb_field_name" is a long string, but names should be managed by a central instance (you?). So I could live with that name. I know not much about mgtt to judge...

I would prefer the shorter name, and add comments. I'm not the config name expert, but I have the feeling, that several other config parameters are also limited to some...

Hi Nico, finally you are right. With other example sketches it works better. Where it breakes the logic: a higher refresh rate should look better. I will do some experiments...

Ok, I will double check. May be I should just add a resistor and/or capacitor.

I have the same issue, no join. I have checked the DIO1 at the RFM95 and the Raspi GPIO and saw a short impulse of 0.9 ms from low to...