Antoine

Ok an export of RAUC_KEY_PASSPHRASE in a do_bundle:prepend fixes it, but I am wondering if there's any cleaner solution, or if this should be done upstream in do_bundle ? Thanks

After more tests, it seems it has nothing to do with OTAs, a simple reboot had the same results : - The device boots, I accept the device on the...

No, I've tried to restart zerotier-one or the device a few times with no success. But it seems to come back on it's own after a while, it's just odd...

and the time it takes to reconnect seems to be quite random too. Earlier today it came back within an hour, now I've been waiting for a few hours, rebooted...

I don't think there is a double NAT on my network, but I'll check. It works well before I reboot / do an update though, the device connects instantly. No...

I have eliminated the network configuration from the possible causes : I have 2 devices, one running an old version of our system and one running the new version. The...

Any idea what could be the cause of this then ? Are there some additional logs I could enable to get more details ? Again, it really seems to be...

Thanks for helping and investigating! * `sudo zerotier-cli info -j` shows a small difference in the listeningOn section, some ports are different between the 2. The device that is working...

@chadrockey For us having a service that leaves and rejoins the zerotier network after booting 'solved' the issue. This is a rather ugly workaround, but it will unfortunately have to...

Hey @laduke, thanks for the ping. I've tested 1.12.2 and it's seems worst than 1.10.6 I was previously running: the ZT interface doesn't get an IP, and I get ```...