Aljaz Ogrin

Standard ESP32 has two SPI ports VSPI and HSPI. One is used for Flash, other for our TFT displays. Did not dig further what -S2 chip has.

Hello, currently only WPS is implemented. No manual WiFi selection. You can replace the line `wifi.begin();` with `wifi.begin(YOUR_SSID, YOUR_PASSWORD);` and this should work fine for your case.

I am working on adding a temperature sensor. Clock is connected over MQTT to Smartnest cloud and SmartThings cloud. Both have display (and history) for temperature so it is straightforward...

_Good idea, that's what I meant when I asked. I will follow your result. It's just that I'm not very good at creating a sketch (firmware), that's why I turned...

Hi, I am not aware of IPS Gen2 clock hardware. All development described here was done on original hardware. It looks like something was changed on Gen2 and you broke...

From the first look I can't spot any major hardware change. Probably Gen2 is just a newer firmware. Shorting 5V and GND will not do any harm if powered by...

I think multimeter is not enough, as you are dealing with high-frequency signals (data transmission lines) between USB chip and ESP chip. So you say clock is recognized by the...

In Feb 2024 this has still not been resolved. Project with all freshly updated libraries and core for ESP32, transferred to PlatformIO, yields this: Arduino (v1.8): 1040501 bytes. PlatformIO: 1325369...

It is weird. In one simple project I used "Import Arduino" function. Moved local libraries to the .\lib folder. And got size difference listed above. Another, complex project, I manually...

@ramiss try to follow my steps. I was able to get same code size.