Ali Jahangiri

Arduino Port Changes after Uploading

2

How to recreate problem: 1. Connect Nano 33 BLE Sensor board with microUSB cable 2. Open Arduino IDE 1.8.19 (on Windows 10) 3. Open the Blink.ino sketch 4. Select the...

Page Up/Down in PDF Viewer unresponsive after several seconds

2

### What happened? I like to use the Page Down and Page Up keys to move through PDFs in Logseq, while the PDF viewer is in focus. After about 7...

IDE unable to install Portenta Mbed OS board package

9

### Describe the problem The IDE attempts to configure a board platform, even though there is an error   ### To reproduce 1. Open IDE 2.0.0rc9.1 2. From the...

'No device found on COMXX' message when IDE identifies board and port itself

21

### Describe the problem After using the IDE for some time, the IDE decides that even though _itself_ identified the board/port, the board/port in question does not exist according to...

Updating rc9.1 -> rc9.2 ignores unsaved sketch

1

### Describe the problem The IDE automatically looks for updates and informs the user. Prior to updating, the user is asked to `close and update` the software. When you have...

### Describe the request I would like to change the size of the text by scrolling + holding CTRL. This is the default behaviour in IDE 1.x. ### Describe the...

Error message when udev code not configured on Linux is unhelpful

2

### Describe the problem It is required to configure the udev code in Linux to provide access to the Serial port. Otherwise, it is not possible to upload sketches to...

Arduino board continuously dis/reconnects in Ubuntu.

6

### Describe the problem Arduino board continuously dis/reconnects in the IDE. I cannot upload any sketch. ### To reproduce 1. Open the AppImage IDE by running the `./arduino-ide_2.1.1_Linux_64bit.AppImage` command in...

exit status 74 - Portenta H7 detected, but loading sketch leads to serial disconnect

2

# Summary Arduino IoT Cloud identifies the Portenta H7 and is able to trigger a soft reset via the Arduino Create Agent. However, upload loading the sketch if faces an...