Alexander Rydén
Alexander Rydén
Hey @antoniom, I’m having the same issue. Did you find a solution?
> * ColoT peer set to 192.168.2.4:8080 (also tried with mcast) CoIoT (CoAP) runs on port 5683 so try changing this setting to `192.168.2.4:5683`. You can probably also just omit...
I just released version 0.17.0 with support for the new Bulb.
Try updating to 0.19.1 and see if that helps.
How are you using the Shelly 1 to control your lock? Is the lock connected to the switch input or otherwise on the Shelly 1 so that you can tell...
Try [homebridge-shelly-ng](https://github.com/alexryd/homebridge-shelly-ng) instead.
Why is the battery level `-1`? Are you using an external power supply?
I just published version 0.18.1 that should remove these warnings. As for the battery level, it will probably be shown as 0% when using a usb power supply so I...
@apartmedia @MrMysakovich That error was fixed in 0.18.1. Perhaps the illegal value is cached. What happens when your DW2 reports a different light level?
@apartmedia @danny1605 I've now released version 0.19.0 that sets the battery level to 100% when running on an external power supply.