Alex Gavrisco

Thanks a lot @caemor for your effort! Is 3.7in b/w display supported? If no, is #35 still an accurate example of adding a new display?

Thanks @jamesmunns ! I've started working on a PR yesterday, however I'm struggling finding a command table for 3.7 - https://www.waveshare.com/wiki/3.7inch_e-Paper_HAT

Hey @caemor @jamesmunns , Thanks for pointers. I'm still figuring it out. I have some weird issues when I try to test the 3.7 display using a NRF52 board. Things...

I've followed waveshare examples when implementing initialization/display sequences. There's something I've missed indeed, since waveshare samples work just fine with 3.7. I'll cleanup some pieces and create a draft PR.

@caemor I've submitted #69 as draft. Please ignore formatting errors, I'll fix it, add tests and do some clean-up once I get a working MVP

Here's how I'm testing that PR on a NRF52 ```rust #![no_main] #![no_std] use nrf52_air_quality as _; use embedded_hal::blocking::delay::DelayMs; use defmt::info; use nrf52840_hal::{ self as hal, gpio::{p0::Parts as P0Parts, p1::Parts as...

Ok. So I was using wrong LUT. For some reason RPi vs STM samples use different LUT for clearing the screen. Now it works fine for B/W setup. I'll focus...

@TommyCpp Is there a tracking issue for migration onto the stable spec? I'm trying to figure out how to set custom buckets for a specific histogram in current (0.16) version...

+1 to this feature. Currently the Thanos helm chart allows setting the service type only for HTTP service. However, it might be necessary to expose GRPC service as well using...

I'd gladly help with the Helm chart, since we're using Burrow in a K8S env. Since you don't use helm, perhaps it's better to submit the Helm chart to a...