ajschorr

On the mailing list, Donald Sharp had requested that I make a log with `debug zebra rib detail`. I made 2 logfiles showing the normal case where FRR starts after...

I'm having the same issue. I was able to get it approximately working by patching ups.conf as suggested with "productid = 3026", but I also needed to patch /usr/lib/udev/rules.d/62-nut-usbups.rules to...

Now I'm wondering: do I need to patch drivers/tripplite-hid.c to add an entry like this? { USB_DEVICE(TRIPPLITE_VENDORID, 0x3026), smart1500lcdt_scale }, Or is protocol 3026 different than 3024? Has anybody else...

I've got version 2.8.0 on CentOS Stream 9, but I guess I can upgrade to 2.8.1. Thanks for the pointer! [smart500rt1u.txt](https://github.com/networkupstools/nut/files/14312727/smart500rt1u.txt)

For the record, without modifying the code at all, I did see that the ups.load value rose above zero once I plugged in some additional devices. I guess it's pretty...

The output.voltage is not scaled properly, but I don't care so much about that value. I'll just assume that it's correct. For the record, it looks like output.voltage for this...