arnold
arnold
I have blinds witw a somfy rts motor. The origanaly remote is an old telis 4
tryed the things from post 17, and changed the repeat time's but that didn't solved it. any more clue's
> Hi! I finally managed to fix the issue by modifying CC1101.h code adding GDO2 configuration for RX...after some testing i think the issue was in the constant change of...
I abbonded ghis and installed an rflink gateway, which worked great.
Yes it works out of the box but its based on a arduino mega. All the info is here [https://www.rflink.nl/](https://www.rflink.nl/)
I did read the raw data but at every key press the data isn't the same. Tommorow i will send the output of the raw data.
Past the raw messages in your tool, and they all look the same. ```[06:37:56][D][remote.raw:028]: Received Raw: 364, -1120, 389, -1125, 1112, -392, 1116, -385, 385, -1128, 368, -1140, 365, -1126,...
stupid me, had to sleep longer :-) after altering nothing happens, i think i have to wait for a second CC1101, so i could monitor what is sending. since there...
did recieve my second device but when trying to send data the other one isn't recieving the data, so looks like somthing is still wrong
i put your delay at the begin and at the end, but it still isn't working. don;t know what you mean with [Did you try the alternative at the end...