Andrew Wilkins

I am experiencing the same issue. I can not find a proper macro to use that will let me compile my project. I keep getting linker errors

Same error on ubuntu 20.04 https://www.loom.com/share/947cf4c756314484aae91b935169f25e

This helped. for linux `sudo apt-get autoremove default-jdk openjdk-11-*` `sudo apt install openjdk-8-jdk` worked like a charm

Good to know that it works. probably just need to document how to enable it

This could also be a me thing that I am not seeing, but thought i would at least mention it

@julianoes I havent manually updated it. but, when i start a new project and pip3 install mavsdk it seems to install the latest protobuf  I would say that if...

From @PX4/testflights No control in stabilized mode. the drone was not reacting to my movement commands. The drone started to slide back, I would pitch forward, and the drone would...

Wanted to post this here as well. Pixhawk4 with arkflow running 1.16 Video: https://www.loom.com/share/141ee5ee32f64e519b5aaf798f495941?sid=f34c75a7-4a02-4fea-be0c-6a24d3742b98 Logs: https://review.px4.io/plot_app?log=4f5c42ac-5696-44e7-8a57-03a033661189 https://review.px4.io/plot_app?log=bb955f4b-f2d9-49d1-b96a-0ba4e06be0a6 I fly in position mode with joysticks instead of RC that i did...

Apologies for the delay, I thought this was in the other PR we were working on. I just updated my comments above

> From [@PX4/testflights](https://github.com/orgs/PX4/teams/testflights) > > No control in stabilized mode. the drone was not reacting to my movement commands. The drone started to slide back, I would pitch forward, and...