Joe AE6XE

unable to see supportdata. see attachment of error. 

Would also like to capture the output of "iw dev wlan0 scan" on both devices. Looking for the beacon for each device (these stations): 64:d1:54:9c:85:af 74:4d:28:92:be:26

I have confirmed that the hap ac2 device is limiting to 802.11b rates -- up to 54Mbps -- 5GHz AC ath10k interface. This is the state before the device is...

Not finding the uploaded .pcap file?

This was my understanding in researching this issue in the past - I assume the available documentation still represents today's implementation. In ath9k, the rate selection logic tests the throughput...

A fixed IP address can occur for some older cameras. What happens is if the camera is rebooted, or anytime the camera is renewing the DHCP lease, and the node...

Sorry, I've not had time to soak all the dialog in this thread, but some statements caught my eye. Just in case this is helpful: 1) joining node LAN's together...

The reflector specs include the gain of the device mounted. In the cambium NS reflector specs the heading for gain is "(Integrated Antenna + Reflector Dish)". In the math, the...

Let's look at this from the perspective of "what is the total radiated power" coming out of the reflector. This is the practical data point needed to deploy. How is...

"presents the dish [reflector] as gaining an additional 19dBi". Which appears to conflict with the calculation you pointed out, "The formula for the gain of a 450mm [reflector] dish at...