aarmono

I have a preliminary build that works with GOG build 1.2.27639 [here](https://github.com/aarmono/Statman/releases/tag/v1.3.4). The LoadScene code is almost certainly wrong because that was the only code I had to actually change...

I'm not sure I understand: is your question how to use the encryption feature in the codec2 library so that you don't need the rest of the software that makes...

I'm not very familiar with the RPITX project, but probably the easiest way to do it would be to use the existing FreeDV mode the project appears to support and...

If Python is a hard requirement then you have a couple options: - Use python C bindings to wrap the codec2 library. If you do this you would likely have...

1. Yes: my fork of the codec2 library adds the support for the encryption. 2. Probably the easiest way to get it working on the SM1000 is to use that...

Re: GSM I haven't tested it much, but sox and/or ffmpeg has a version of the GSM audio codec built in that I tried, and I couldn't get it to...

I have one of those USB hubs -- which I bought with the intent of working with someone who was trying to make the sort of integrated battery pack you...

In case it helps you in this effort, I will describe what I remember about how I did the Pi Zero ports: 1. Start from the default Pi 4 buildroot...

I looked into it a little but wasn't able to find a hat that had two audio inputs and two audio outputs. Probably the most promising one I found is...

I'm just using a USB3 hub I already had with a USB OTG adapter cable. I think I bought the hub from Staples some years back. I also tried using...