Ådne Hovda

If the meter provides the current local time then is it necessary to even consider time zone or query NTP in the first place? Maybe kWh aggregations per day/hour will...

That's right, I guess systemd-networkd is capable of making the bridge consistent eventually. I just tried it with ifupdown/ifupdown2 and the bridge port is not coming up. I've tried it...

On Windows, the adapter is just disabled on service shutdown. Only if you leave the network it will be deleted. I have not tested other platforms. Once you set `allowManaged=0`...

Related to #659

Current conf-file I'm using: ``` sample_rate 2M decoder { name=WattsThermostat, modulation=OOK_PWM, short=260, long=600, sync=6000, gap=0, bits=54, reset=900, match={8}5a, get=@8:{16}:id, get=@24:{1}:pairing }

> The pulse sample is `{62} 5A C5 89 F1 F0 5A FC` but the BitBench has shorter codes (54) -- can you check that? I noticed that too, but...

I turned on and put one device inside the refrigerator and captured the data, including timestamps. This should provide some data about changing thermistor-values only, without any changes to the...

Wow, that's good progress. I noticed I had experimented with inverting the data and left it flipped in the bitbench. When I flip it back it indeed counts from 0-255...

Okay, so perhaps it makes sense to keep the data inverted. I noticed this text in the datasheet for the receiver.  The analyzer defaults to long pulse => logic...

I see, makes sense. Yes, that data stream should be from around 25C to around 4C-6C which seems correct. The set-point seems to be upside down, i.e. the numbers decrease...