ZhenyaKa
ZhenyaKa
Forgot to say: Print via Octoprint: "Error reported by printer Your printer's firmware reported an error. Due to that OctoPrint will disconnect. Reported error: cold extrusion prevented"
PID is ok. It turn off when printing. I got checksum errors in LOG: | Send: N11633 G1 X92.034 Y140.036 E2.3119*96 | Recv: ok | Send: N11634 G1 X91.753 Y140.321...
About 30 mins with errors 2019-01-08 15:32:51,943 - octoprint.util.comm - INFO - Firmware didn't send an 'ok' with their resend request. That's a known bug with some firmware variants out...
You must include this in FAQ. It is very very hidden protection!
Yes but usally no many people reads release notes. And this "bug" very hidden.
I don't know, but I think you will get a lot of "issues" from octoprint users if they want to use Kimbra and dig deeper :) Or just switch to...
Maybe good place will be in configiration_overall.h or in web-configurator :) ATTENTION!!! ATTENTION!!! ATTENTION!!! add S530 S1 in start gcode :)
Okay I will add issue them
write this "protection" in any FAQ please both developers!
Thanks a lot! Only this worked for me!