Zach1812

I followed the thread and replaced the display.h DISPLAY_SPI_DRIVE_SETTINGS to the same in the mpi3501.h one. Nothing changed. My output clearly recognizes the screen as a 240x240, I just don't'...

After a lot more testing and much fussing and soldering I've been able to make it work. ...Kinda. I was able to follow [this](https://krystof.io/mirroring-raspberry-pi-hdmi-video-to-a-st7789-1-3-inch-lcd-display/#ftoc-option-2-fbcp-ili9341) website to change the two files...

I just reconfigured the hotkey button like you posted. However that did not solve the issue. Pressing select while in a game immediately quits to the menu.

I've used lr-Gambatte(Metroid II), lr-gpsp(dragonball Adventures), lr-picodrive(Sonic the Hedgehog) all with the same issue. What GPIO pin are controls (specifically select/esc)mapped to for the zero?

That worked. It took a while to get the wifi setup again but reflashing the card worked. Thanks!

This happened to me yesterday when transferring ps1 roms to my Powkiddy Q90. On the old 1.33 software, the transfer was faster due to sd card to computer, but MTD...