Minjung_You

When I open the BVH file in 3D Max, Maya and Motion Builder, I get these error.   How can I solve these problem..??

Thank you for your answer! I have one more question. Is there any way that convert the **mat to jpg format byte array**? except the imwrite... I saw the 'imencode...

Thank you for your reply! Is it possible to extract the humanoid animation using FBX exporter? What I know it was impossible...

Thank you so much! It works well.

Thank you for your support! I try to execute MPU9250Optimized.ino. Then I got this result. ////////////////////////////////////////////////////////////////////// MPU9250 9-axis motion sensor... MPU9250 I AM 71 I should be 71 MPU9250 is...

I saw the code you linked. (= MPU9250Optimized.ino) In this code I could do calibration the accel, gyro and magnet. After calibration, I move the IMU sensor but values did...

These are the sensor biases. //////////////////////////////////////// accel biases (mg) 191.59 187.68 -17.40 gyro biases (dps) -1.21 0.18 -2.26 K8963 mag biases (mG) 219.72 216.15 385.72 AK8963 mag scale (mG) 1.17...

I set the interrupt pin... (I changed the variable to "int intPin = 2", and then connected to Digital Out 2 in Arduino Nano.) but still all of the values...

Well. Thank you for your help. Maybe I think I fixed this problem. However, The sensor values are still incorrect. This is the values when the sensor is calibrated and...

When I calibrate the magnetor, I move the sensor like figure eight. Then how to action, when I calibrate the acceler and gyro?