XuGuohui
XuGuohui
The fix to I2C reset function should be applied to other Gen3 platforms as well, but we're not running into I2C issues on those platforms so far, so I leave...
Hi @ScruffR, since that sample is created for Arduino, you need to add related libraries to Particle Build manually, so the path where you put the library to may differ...
You can not compile the example on Particle Build now, as the build farm hasn't been updated before v0.2.4 is available. We manage to release firmware v0.2.4 this week, but...
Hi @ScruffR , You can now build applications for Duo firmware v0.2.4 on Particle Build! Cheers!
@adithya003 , can your Duo enter Safe Mode? Please have it a try and then upload a known valid user application via Particle Build or Arduino IDE. After that if...
How did you make your Duo enter Safe Mode? It should be: 1. Press both of the button 2. Release only the RESET button 3. Release the SETUP button when...
I see. Please follow the following link (Back to factory default state) to recover your Duo: http://discuss.redbear.cc/t/general-recovery-of-the-duo-from-stuck-state/216
Hi @danshev, 1. The broadcasting UUID in the iBeacon demo is just for demonstration. If you want to make your Duo discovered as iBeacon, simply change the UUID in the...
Hi @sthanh , This is probably caused by an unstable cloud connection or Wi-Fi connection. Anyone might suffer from this situation. If the Duo is flashing green, it means that...
@suranjandot Will the Duo automatically connect to cloud again if you don't power it cycle?