NeMesiS
NeMesiS
Not sure what I would be comparing that to for a pinout but the RP2040 MCU has 54pin not at all similar to either ATmega32 or Atmega64. I'm not sure...
 Probably the most easiest solution would be to add an addition ATmega32u4 slave for Player 1. Or from the perspective of the current hardware we are adding the...
 An alternative solution would be to use a dual USB host controller that will serve as both the Input USB Port and Output USB Port for Player 1....
 I believe Diagram 3 would be the most efficient and cost effective use of hardware. Instead of using an ATmega32u4 slave for every port, if we could just...
 **Benefits of using a more capable MCU...** _Firstly I'd like to discuss what's already supported by the ATmega32:_ **Xbox360 Wireless Receiver:** The device acts in a similar manner to...
> It wouldnt be alot of work to recompile to RP2040. Main difference being a USB C port instead of USB Micro I agree USB type C port would be...
 I would be happy to supply you a couple of each of the xbox wireless receivers. They are the aftermarket versions which seem to be available everywhere. I could...
Interesting... Alternatively I would have suggested "STM32" but seeing that I can buy standalone "RP2040TR7" MCU from element14 it would still be possible to do custom PCB design, actually the...
> ATSAMD21... is really cheap. For the sake of research I compared prices. **Development Boards:** RP2040 = $10.95aud [https://www.sparkfun.com/products/18288](url) SAMD21 = $22.50aud [https://www.sparkfun.com/products/13664](url) **Micro Controllers:** RP2040TR7 = $1.21aud each @...
Interesting... So I made an enquiry over at Elecrow since if I were to get some PCBs made up that's where I would likely to go. RP2040 = $0.92/unit (@...