Waldmensch1

The [email protected] workaround works but any Example ends in a Panic loop on "Joining" so the Library is unusable on PIO for whatever reason.

I put some code in to show the pins. These looks okay and match with WirelessStick mapping here: https://resource.heltec.cn/download/Wireless_Stick/Wireless_Stick.pdf So no clue why nothing is shown on Display. Only serial...

I tested the "Wireless Stick FactoryTest" Example in the meantime, there the Display works like a charm. So it is not broken. This Example uses the heltec.cpp library if I...

In my GIT you find a TTN Mapper Project (platformio) which works on ttgo t-beam Rev 1.0 and 1.1 and Heltec Wireless Stick. The 3 environments can be selected in...

Da Vodafone Kabel bei uns andauernd ausfällt und ich ein Vermögen an LTE Volumen für den Backup Stick investiere, würde ich auch gern ein automatisiertes Ausfall- Tagebuch führen. Ich habe...

Nope, Result is the same ``` Connected to ELM327 Clearing input serial buffer Sending the following command/query: AT SH 17 FC 00 7B Received char: ? Received char: \r Received...

I changed my loop that it plays out the AT command sequence I mentioned one by one. Also I set ATH1 to see what headers maybe come in. I try...

I found another big list of PIDs. If you search on this page for „BMS Temperatur Pack Gesamt“ - how this record can be used in ElmDuino the proper way...

I googled a bit around: could it be that UDS need a specific handling which is not supported yet by ELMDuino? I have seen some descriptions that the session have...

many thanks for the hint with the break. Copy/paste of one piece of code multiplies the proplem :) I get at least a response on 1003 command. I'll check tomorrow...