WB0OCV

I recently had a similar problem and traced it to a conflict with the rtaudio.dll. Try removing that dll from the sdrpp folder and see if the program will open....

Thank you for the reply Marc.  Please find attached a ZIP file which includes three .cu8 files, the two Messages Tables, and an FCC letter listing the operating frequency of...

Hi Marc, Yes, I have.  In addition to selecting the 915 MHz option from the plugin and verifying that it actually forces a reset of the SDRSharp center frequency to...

Hi Marc, I’ll ZIP the various files into separate smaller ZIP files and email them in separate emails. On another not, I tried running the Windows version of rtl_433 and...

Windows-rtl_433 cu8 file 

N° Mes. Time : Protocol : Model : PacketTypeID: PacketLength: ApplicationVersion: ERTType : ERTSerialNumber: ConsumptionIntervalCount: ModuleProgrammingState: TamperCounters: AsynchronousCounters: PowerOutageFlags: LastConsumptionCount: DifferentialConsumptionIntervals: , TransmitTimeOffset: MeterIdCRC: PacketCRC : Meter_Type: Integrity : Modulation:...

Plugin cu8 file, 1 of 3 From: marco402Sent: Saturday, June 25, 2022 09:46 AMTo: marco402/plugin-Rtl433-for-SdrSharpCc: WB0OCV; AuthorSubject: Re: [marco402/plugin-Rtl433-for-SdrSharp] Wrong Frequency Displayed in Messages Tables (Issue #4) same problem, normally...

Plugin cu8 file, 2 of 3 From: marco402Sent: Saturday, June 25, 2022 09:46 AMTo: marco402/plugin-Rtl433-for-SdrSharpCc: WB0OCV; AuthorSubject: Re: [marco402/plugin-Rtl433-for-SdrSharp] Wrong Frequency Displayed in Messages Tables (Issue #4) same problem, normally...

Plugin cu8 file, 3 of 3 From: marco402Sent: Saturday, June 25, 2022 09:46 AMTo: marco402/plugin-Rtl433-for-SdrSharpCc: WB0OCV; AuthorSubject: Re: [marco402/plugin-Rtl433-for-SdrSharp] Wrong Frequency Displayed in Messages Tables (Issue #4) same problem, normally...

Thanks Marc.  I’ll run some tests with the dll you sent. I’m not sure why the ZIP files won’t open for you.  A few years ago I migrated from WinZip...