Vishal00000

Hardware watchdog not working

2

The hardware watchdog configured in IOT2050 for the kernel 5.10.100 has issues, the watchdog does not reboot whereas, the watchdog configured in IOT2050 for the kernel 4.19.94 works fine with...

BLE device no more discoverable after pairing DBUS error

4

While pairing to a BLE device with the PIN, the below DBUS error is thrown: `DBusError: Did not receive a reply. Possible causes include: the remote application did not send...

Dbus Connection Refused

1

After setting the environment variables, bluez is not getting the access to Dbus. ``` export DISPLAY=':0' export DBUS_SESSION_BUS_ADDRESS='unix:path=/usr/var/run/dbus/system_bus_socket' ``` ``` /home/root/node_modules/dbus/lib/bus.js:20 self.connection = _dbus.getBus(0); ^ Error: Failed to connect to...

Decrypt Error with Open SSL 3

4

Using Debian 12 (bookworm), using jose CLI unable to decrypt a JWE with Open SSL 3.0.9 Getting the error: Unwrapping failed! How to proceed ? Any suggestions ?

Error during decrypting

5

Occasionally while using the JWE.decrypt function call, I get the following error: ``` { message: 'no key found', stack: 'Error: no key found\n at processKey (/home/ubuntu/node_modules/node-jose/lib/jwe/decrypt.js:176:22)\n at ' } ```...

Update DbusInterfaceBase.js

2

To fix the issue of accumulating listeners. The issue of accumulating listeners occurs because the code does not remove the forwardPropertyChange listener from the property interface when the DbusInterfaceBase instance...

BlueZ: 5.55 Kernel: 5.10.100 While reading the services and characteristics of a BLE device, if there is a _connection abort error_ or _services could not be resolved_, the device is...

No introspectable Error

8

While running the node_bluez, I am getting the following error: This error is caught at bluetooth.init() itself. ``` { message: 'No introspectable', stack: 'Error: No introspectable\n at /home/root/node_modules/dbus/lib/bus.js:131:15' } ```...

Retain temporary devices

2

Version: BlueZ 5.79 I had written production code in BlueZ 5.54. Recently, I migrated to BlueZ 5.79 In BlueZ 5.54, I have handled the removal of devices in cache But...

Check status of pins on the board

1

Hi, I would like to know on how to check whether certain pins are enabled or disabled For example: For Arduino pins (X10-X13) are enabled or not ?