Valstee

Hi, I use a LimeSDR mini with version 6.20 of SDRangel on Ubuntu 20.04 and it works perfectly. The only error I have is when starting SDRangel in the logs,...

I just tested with Ubuntu 22.04 and Sdrangel 7.6.2, I have no problem everything works perfectly. I don't have the calibration error message I mentioned before and I use it...

in fact if I have indeed a message saying : ``` Rx calibration: MCU error 6 (invalid Rx path) 2022-09-02 15:35:07.439 (C) LimeSDRInput::applySettings: calibration failed on Rx channel 0 ```...

Thanks for the information about the choice of the antenna. I had just run sdrangel and limesdr to test in relation to this issue. Everything works for me now !...

Hi, I've got the same problem. Did you try your solution ? Thanks, Valstee

yes sorry, I waited to have again the same configuration (i.e. a simultaneous passage of the 2 satellites). ``` 2023-05-17 11:24:43.755 (D) SatelliteTrackerWorker::doppler "UVSQ-SAT" 2023-05-17 11:24:43.756 (D) SSBDemod::webapiSettingsPutPatch: forward to...

Hello @srcejon , Thank you very much for the patch! 🥇 Only now the problem is that the doppler correction doesn't trigger every time... I'll get the logs.

``` 2023-06-05 12:23:45.684 (D) SatelliteTrackerWorker::doppler "UVSQ-SAT" 2023-06-05 12:23:45.684 (D) SSBDemod::webapiSettingsPutPatch: forward to GUI: 0x561cb4f50950 2023-06-05 12:23:45.684 (D) SatelliteTrackerWorker::doppler "UVSQ-SAT" 2023-06-05 12:23:45.685 (D) SSBDemod::webapiSettingsPutPatch: forward to GUI: 0x561cb4f50950 2023-06-05 12:23:45.690 (D)...

Sorry for my late reply, but for some reason the bug doesn't show up every time. I'll add the line and let you know. thanks

yes exactly --> PUT : (force) restart the feature