Befaco
Befaco copied to clipboard
VCVRack
Befaco Eurorack modules for VCV Rack
It's debatable, but I think most ppl don't want a "audio frequency" pulse wave to be DC coupled. 
I think the VCV minblep code has a DC offset. I used to subtract it out in my VCOS. 
 From [here](https://community.vcvrack.com/t/befaco-muxlicer-self-patching-com-out-to-gate-mode-cv-in/15364). > What I did > > 1. Connect “Com I/O output” to “Gate mode CV input” > 2. Turn “Gate mode knob” clockwise fully > 3. Set...
When Rampage is set as follows the output rises to 9.451 volts then stops and the channel remains in the rise phase until the range is changed or the shape/rise...
It seems sync is not working. Checked the code, looks like there is nothing done with this parameter. Would be nice if it would work. ``` $ ag sync src/EvenVCO.cpp...
Is it possible that the cycle gate input does not work as intended? According to the manual, the inputs 18A/B should invert the setting of the switch. In the plugin,...
Fedora 23 Linux Rack master (0.6.x) Hi Andrew, I assume you already know this. The same is true (similar errors) for the ESeries and Audible Instruments repos. Please advise if...
I don´t have the rampage but the serge DUSG. theCV inputs in rampage are inverted so sending a 1v/oct signal to the exp input it goes lower in frequency as...
See here: https://forum.4ms.info/t/befaco-octaves-mislabeled-gain-jacks/618
