Phil Stracchino

I'm specifically thinking, as I said, Fizzware's mod Tall Doors, but I don't know if there are or will be other non-standard-door mods for 1.16. Roxa's Tall Doors had 1x3,...

Stefan, I use only one of these drivers, net-print/brother-hll8350cdw-bin, and was able to change it locally to EAPI=7 with no other changes required except to regenerate the manifest. It's not...

FYI the following are the ebuilds I still show as having EAPI=5: /var/db/repos/brother-overlay/net-print/brother-dcp9020cdw-bin /var/db/repos/brother-overlay/net-print/brother-dcp9055cdn-bin /var/db/repos/brother-overlay/net-print/brother-hl3070cw-bin /var/db/repos/brother-overlay/net-print/brother-hl4150cdn-bin /var/db/repos/brother-overlay/net-print/brother-hl4570cdw-bin /var/db/repos/brother-overlay/net-print/brother-hll3270cdw-bin /var/db/repos/brother-overlay/net-print/brother-mfc7440n-bin /var/db/repos/brother-overlay/net-print/brother-mfc9130cw-bin /var/db/repos/brother-overlay/net-print/brother-mfc9320cw-bin /var/db/repos/brother-overlay/net-print/brother-mfc9330cdw-bin /var/db/repos/brother-overlay/net-print/brother-mfc9332cdw-bin /var/db/repos/brother-overlay/net-print/brother-mfc9340cdw-bin /var/db/repos/brother-overlay/net-print/brother-hl3040cn-bin /var/db/repos/brother-overlay/net-print/brother-dcpj715w-bin

To @Anard's question above, I see no good reason **NOT** to go straight to EAPI 8 across the board. Doing only the EAPI=5 ebuilds just means we have to do...

It SHOULD be kept synced, but let me try forcing a manual resync

Huh. For some reason it did not auto-sync. Manually forced a resync and good now.

Yeah, mine was missing the auto-sync, I added it manually (and for one other repo similarly lacking)

This also affects net-print/brother-hll8350cdw-bin, and presumably **all** of the drivers.

I think the issue is that EAPI 5 is no longer supported. These ebuilds all need to be updated to at least EAPI 6 (preferably EAPI 8) as well.

On 8/16/22 17:44, stefan-langenmaier wrote: > Hi everyone, thanks for all the feedback and the pull request. > > Sorry for being so inactive but unfortunately I'm a little bit...