UCTRONICS_LCD35_RPI
UCTRONICS_LCD35_RPI copied to clipboard
UCTRONICS
This driver is used for UCTRONICS LCD35 with SPI interface
I have been trying to incorporate a wifi driver and was running into issues with installed versus running kernel versions. Finally tracked it down to the UCTRONICS install process. The...
Hi, Is the source for the driver available, either standalone or as a diff for the kernel source? It's not clear how the kernel images were built. I see CONFIG_FB_ILI9488=y...
I'm not sure if it was when I plugged in the screen or just after restarting from installing these hdmi drivers and this is after having installed everything, but my...
If I follow the instructions as stated, it reboots the system as expected, then just boots to the 'rainbow' GPU test screen, indicating that no OS is detected. If I...
How can the screen orientation be changed (such as landscape/portrait)? I tried editing /boot/config.txt as well as config.txt inside the uctronics folder but none seem to impact the screen
How to recompile with different kernel? I followed the instructions but get a kernel error when booting.
Followed all instructions multiple times, still get a white screen. Any advice?
Installed Octoprint to SD via their image file. Installed drivers for UCTRONICS_LCD35_RPI / Octoprint (followed step by step installation instructions). Screen worked fine on console. Installed Octoprint desktop via "sudo...
Any chance of getting either the ili9488 driver as a module or a kernel with both the hdmi framebuffer and the lcd framebuffer active? I had hoped to use rpi-fbcp...
