Andrei Ignat
Andrei Ignat
Want to bump this up and add: Poll the GCODE_VARIABLE regularly to update the buttons display. - display_text - icon - bg_color - text_color - border - type - slider...
Is anyone working on this? This makes HA quite useless on iOS for me when I want to control the temperatrure.
Thank you! G10 is the old way and M568 is the new way: https://duet3d.dozuki.com/Wiki/G10
This looks very promissing! Any updates @jschuh
If the server is running then it wont install again. Please check that the ktamv files inside the klipper extras folder exist and are accessible. /Andrei26 juni 2024 kl. 23:27...
Hi! I will have to refine this and include it inside the readme but for now here is an example start G-code using the supplied macros for PrusaSlicer: ``` KTCC_INIT_PRINT_STATS...
Sounds like you have a low heater_standby_to_powerdown_delay so that it shuts down the tool. Default should be 600 if I'm not misstaken. That is 10 minutes. Check it with KTC_TOOL_SET_TEMPERATURE...
Also check what standby temp you have.
The temperatures are changed dynamically in the background. If you don't want to change the temperature, then you have to setup the `heater_active_to_standby_delay`. See the last two settings here: https://github.com/TypQxQ/KTC/blob/main/doc/configuration.md#----inheritable-options
This is not the expected behaviour. Sorry for late response. Please attach your tool and toolchanger configuration.