TryBreakFixAgain
TryBreakFixAgain
I added a SD-Card Logger on my Mods, Works like charm. ;)
@Tz1rf At the moment I write out the complete serial output to a static text file called datalog.txt, including a display warning if it is larger than 5mb at startup....
@Tz1rf not only, some limitations are based on the SD lib its a hard combination for me, im only a beginner with microcontrollers and coding, and my free time is...
i ran into the same problem and realised that it was sometimes due to bad connections, but also partly due to the power supply, especially with the very cheap displays....
Do you know how to use the arduino ide? install the adafruit ssd1306 library, in the examples you will find the ssd1306_128_32_i2c.ino install it on your pico. if it gives...
[ssd1306_128x32_i2c.ino.zip](https://github.com/cecio/USBvalve/files/15338862/ssd1306_128x32_i2c.ino.zip) no problem ;)
Sounds like hardware issue, do you get something somehow, or nothing at all? if u get nothing your displays could use an other I2C adrress, but i dont think so
the hardware side should be less of a problem, 5v, gnd and one gpio. Single LED are now quite easy and cheap to get, I've tinkered with them a bit,...
I tinkered a bit and found a quick and dirty solution based on NeoPixelConnect. [https://github.com/MrYsLab/NeoPixelConnect](url) My code is totally experimental and not professional, I don't know if it affects other...
thank you very much, i am new to coding, i belong more to the 3d printing and soldering section. i think it's very cool that you want to keep everything...