Troll338cz

If this ONT supports it you could enable telnet with Huawei flasher, i played with HG8010Hv6 and was able to fully unlock it with few custom .bin files that exported/imported...

If you have full linux shell you run this  HWaddr is the MAC, interface may not be br0 so run just "ifconfig" and it will show them all

If you have full shell want to overwrite password you need to edit /mnt/jffs2/hw_ctree.xml like tutorial in "X_HW_WebUserInfo" replace Password= to ``` Password="$2p:'WQAN8=NO*;Q@G9o@5xp_<=4A7-AIC7c@`DvSPob^n.wKT.8TClmQ=#1`)pK_t'8)ia2k:s@#9n5oP^qwNNAX[_BuW=nERs*#M$" ``` and Salt= ``` Salt="35cd44343f919965d57c6674" ``` This...

Download HuaWei flasher and flash this file [TelnetEnable.bin](https://github.com/Troll338cz/HWFW_GUI_EN/raw/refs/heads/master/test_fw/TelnetEnable.bin)

Connect ethernet directly to ONU and make sure you can ping 192.168.100.1 (or what ip your model uses) [PANDA FLASHER.zip](https://github.com/user-attachments/files/17194514/PANDA.FLASHER.zip) Select correct adapter from "Network" list  Browse to .bin...

That file isn't really a firmware upgrade, its exploit that enables telnet. Its possible it just wont work on your device (even if it should), i have HG8010Hv6 mine was...

And honestly it's kind of Anime4000 fault, he provided password values but didnt specify his MAC, users who put HIS hashes even if it wasnt needed are now locked, i...

Maybe ask ISP to give you a replacement lol. UART doesn't work and unless you want to try pasting 65 thousand combination by hand then it's easiest thing to do....

I dont think its getting downloaded. I had some issues with it not saving jffs2 content even with fiber being disconnected. Copying your xml to hw_ctree.xml and hw_ctree_bak.xml then reboot...

I did all of this on HG8010v6 with firmware V5R020C10S020. Calling /sbin/reboot after copy saved it there. Sadly i dont have newer firmware for this device (someone from a ISP...