Triangulix

### Did you test the latest `bugfix-2.1.x` code? Yes, and the problem still exists. ### Bug Description When starting the z offset wizard the print head homes and then goes...

"Skin Overlap Percentage" not used for skin if "Extra Skin Wall Count" is > 0

2

### Application Version 5.1.0 ### Platform Windows 10 ### Printer Custom ### Reproduction steps Set "Extra Skin Wall Count" to a value > 0 and set "Skin Overlap Percentage" to...

### Is your feature request related to a problem? When printing walls with more than one line the first line is printed, then the nozzle makes a 90° turn, travels...

Additional margin of a brim is applied to all layers of a print

2

### Application Version 5.1.0 ### Platform Windows 10 ### Printer Custom ### Reproduction steps Have a model that reaches over its footprint in at least one direction. Place the model...

TSP Infill

9

### Is your feature request related to a problem? Most infill patterns have crossing lines. These crossing lines, when printed at high speed, can create little bumps at every crossing....

### Is your feature request related to a problem? I'm currently optimizing a profile for speed and I noticed that bottom layers and generally layers on top of a flat...

I'm using VeraCrypt 1.21 with windows 10 and I couldn't find any mention that the following issue has been resolved yet: When the computer is turned on and the boot...

Settings mode support changes retraction settings

3

When I apply the settings for optimal support removal there are also changes made to Retraction Distance and Retraction Speed. In my understanding such settings should only be changed if...