John Gibson
John Gibson
Same here, layout option not showing 
Here is what I used: MP8 pin adxl pin gnd gnd +5V vcc PA5 SCl PA6 SDO PB15 CS PA7 SDA
I am just now trying to install my adxl345 on my Manta M8P / CB1 and am unable to boot with the sensor attached to SPI1. Interestingly enough, if I...
No resolution yet...was working with a BTT tech on their FB groop and tried a lot of things, now that tech has gone silent. *-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*- *John* On Tue, Mar 14,...
So we have it posted here...but I am not too hopeful that BTT will pick it up and respond. I have gone to several Discord chanels and the BTT Facebook...
@RickoT I have the same ADXL, Just to verify you are not using SPI1, but connecting to PC4 and also want to make sure you can boot with the ADXL...
@RickoT You are showing everything wired up to SPI1. Which is NOT CS pin PC4 but rather PB15. Not sure how you have yours working. The wiring you show is...
@RickoT I see the disjoin now...you have version 1.1 of the board, I have version 1.0. Same wiring different pin assignments. Glad yours is working maybe this is an issue...
Just a very small current draw while hooked up. NP to leave it on. I swapped PA6 and PA7, booted, but no communication with the ADXL. Again, mine works just...