TomComm27

No, it doesn't blink when I supply it with energy. Thanks to you I have the solution: The password was correct, but the SSID is case-sensitive. The "FRITZ" must be...

What else could I try to find out what the problem is?

I have tried it with my iPhone15 and an older Samsung Galaxy with the Speedybee APP. -> The Speedybee is found but an error message always appears when connecting. I...

I haven't tried Betaflight yet, I will definitely do that and give feedback! What is exciting is that ArduPilot works!

I have now connected the Speedybee to Betaflight via DFU using a USB cable and installed the firmware file "betaflight_4.5.0_STM32F405.hex". The connection works but no "data" is displayed and I...

I tried it exactly as you described: 1. flashed Betaflight firmware with "Full chip erase"  2. flashed in the INAV Configurator WITHOUT "Full chip erase Unfortunately again without success:...

I have been in contact with Speedybee Support for several days. I have already sent them videos and photos of my flight controller. According to the LED status lights, everything...

Ich habe das problem selber gelöst. Einfach das komplette "config.yaml" Skript verwendet: ``` device: /dev/ttyUSB1 slave_address: 1 poll_interval: 60 poll_interval_if_off: 600 inverter: name: solis2mqtt manufacturer: Ginlong Technologies model: solis2mqtt mqtt:...

Hello synersignart and SNGFP, I have also been struggling with this problem for 2-3 weeks. I also tried the 7.1.1 firmware from inav yesterday without success! I have been liaising...