Tom-Cat
Tom-Cat
WHDLoad doesn't start or crashes with a guru when you set the JIT instruction depth to 1 with EmuControl. note: if you start WHDLoad first and then drag the JIT...
When using the SOCKET_CMD_RUN_CRT command to execute a CRT on the Ultimate64 over network and if I send CRT's bigger than (around) 193k the whole U64 crashes (in different ways)...
Hi In the https://csdb.dk/release/?id=151344 (Sail to the king picture) there is a strange FLI bug present when there shouldn't be any (or better - it should be properly masked with...
Wildbunch demo by Focus,... : https://csdb.dk/release/?id=41462 In the twister part right on the edge where border starts there is a corruption:  It seems this might be a similar problem...
The Comaland demo has a VIC bug on the right side of the screen in the 'screen wobble' part.  Latest 3.10c firmware on newest U64 Elite 1.41
In the Booze Design - 30 Years demo there is a problem with the Bob part - there are big horizontal glitches. Demo: https://csdb.dk/release/?id=219292  U64Elite v1.41 - 3.10c
In XXX demo by Lethargy the last effect on disk 1 (4x4 twister) is VERY jumpy, should be stable, but the screen is jumping up and down all the time....
If you have 2 different SID chips installed in the sockets and you want to "swap" them you need to go to the menu, F2, Audio Mixer, change one SID...
U64 [1.43] [3.11] When using poweroff REST method machine turns off with a very loud POP in volume
When using poweroff REST method machine turns off with a very loud spike in volume - a loud POP is being emitted on both channels, afraid it might damage something...
I am updating my tool for Ultimate64 to use as much of REST API as I can. Most of the stuff works, but drive image mounting always produces "Bad Request"...