Timlukas Bloch

Just to keep this updated: http://www.downthemall.net/delays/

Just to keep this updated: http://www.downthemall.net/delays/

As I'm still not tired enough: ``` $ sudo upsd -V Network UPS Tools upsd 2.8.0-199-gfdb4b59e6 ``` Same result, though. ``` $ sudo upsc ups [...] input.voltage: 231.1 input.voltage.nominal: 0...

Yes, the 0.4 driver showed 230V: ``` driver.version: 2.7.4 driver.version.data: CyberPower HID 0.4 driver.version.internal: 0.41 input.transfer.high: 290 input.transfer.low: 165 input.voltage: 231.3 input.voltage.nominal: 0 output.voltage: 230.0 ``` I'm not sure however...

Hello! I tested a few weeks ago manually disabling `cps_fix_report_desc()`. Just tested again with the new `disable_fix_report_desc` flag. First of all: Am I correct in assuming `disable_fix_report_desc` needs to be...

@nbriggs On NUT `2.8.0-421-gdb4c9fb71` with `libusb 1.0` and `Generic HID driver 0.49` running `$ sudo /lib/nut/usbhid-ups -DDDD -a ups` as above, this is the report descriptor: ``` 0.014107 [D2] Reading...

I don't understand most of your recent comments as I'm not familiar with the codebase, but I just pulled the latest version from git, and while the issue isn't fixed,...

@jimklimov `dmesg` has no complaints, I'll have to check to UPS later. This only happens in debug though, not when the NUT service is actually running.

I'd like to see historical data to compare route changes over time. E.g. "Oh, today my traffic went though FRA, while it got forwarded through AMS yesterday and BRE last...

I've just tried again using the native "AnythingLLM Embedder" with the following non-functional result: ~~~ [backend] info: Adding new vectorized document into namespace buffalo-bills [backend] info: [NativeEmbedder] Initialized [backend] info:...