TheSwede86

I also came across this trying to get 18.04 to work, I believe a workaround can be found here: ` sudo apt-get update -y sudo apt-get install python-pip -y sudo...

Same here, had a whole back and forth with the support about it. I received "Error in NFC communication" together with the constant "Tap or insert your Yubikey" which made...

@haojhcwa Thank you so much for your reply. Just wondering if you might have any update? Appreciate the work you guys put in, just wanted to have a rough estimate...

> Which version of cockpit-podman do you use? As far as I can see it's only available in [ubuntu 20.10 and higher](https://packages.ubuntu.com/search?suite=all&searchon=names&keywords=cockpit-podman) Giving you the instructions I followed (did a...

> I've asked the podman team and unfortunately it's not simple to improve the container registry search as we are dependent on the registry for search results. Thank you for...

> There is a high probability it will work out of the box with a SD card but I don't own a R4SE so I could not test. There is...

> > There is a high probability it will work out of the box with a SD card but I don't own a R4SE so I could not test. There...

> It might work, but we currently can't proceed past u-boot. It appears that the images built for the R4S are mbr/dos formatted, and the first partition doesn't have a...

> I test flash OpenWrt-AO-NanoPiR4S-full-22.03-20220928-ext4.zip into r4se eMMC，seems unable to boot. > I don't own a R4SE so cannot test the eMMC feature but I will try to make those...

> Have a read through this thread and see if you think a setting in the monitor may be the cause. https://github.com/PartialVolume/shredos.x86_64/issues/64 Thanks, I never knew I had such a...