ThatMishakov

> > > @ThatMishakov > I think the best approach is to use DSA driver[1]. Patch for xrx300 and xrx330 has been accepted upstream[2]. > > Driver performance comparison on...

> > @ThatMishakov > > I think the best approach is to use DSA driver[1]. Patch for xrx300 and xrx330 has been accepted upstream[2]. > > Driver performance comparison on...

> > Hello. It looks like I've been getting those errors because I didn't apply the patches from #3085 properly, but now after doing that, I am getting > >...

> > This is the error that I'm getting on the bootup now: > > `[ 11.383864] gswip 1e108000.switch: dsa switch register failed: -517` > > [#3085 (comment)](https://github.com/openwrt/openwrt/pull/3085#issuecomment-647136970) > Seems...

I have just tried setting the router as my main gateway (I have GPON connection) and after setting the port 4 to be WAN with VLAN 20, the port went...

I have noticed that EASY388.dtsi from UGW-7.5.1.40 has additional interrupts (32, 69, 95) for ethernet. Is it known what they are for, are they different from xRX200 (vr9) and could...

I had rebased my commits onto the main master. @adschm Lantiq seems to have switched to DSA, could you please see if I need to change anything? Also, I was...

@abajk I had just rebased to the latest main master, and the interrupts still hang after a few seconds of iperf3 with no errors. Might new tx-burst-length be related to...

I'm a bit busy right now, but will probably try this weekend

I am having the same issue on denky32, and have managed to fix it by setting `lib_ldf_mode = off` and cloning the repo into my project, but I think it...