Thomas

Changed downloader.sh link to reflect [recent commit for handling new download links](https://github.com/joergi/downloader/pull/12#issue-563461831). Both bash scripts using downloader.sh in this repo were using the tagged 0.3.0 version which is now outdated...

Change downloader.sh link to reflect [recent commit for handling new download links](https://github.com/joergi/downloader/pull/12#issue-563461831).

EZ Flash V/3-in-1 Support Request

8

Hopefully this is the right place for this. I was wondering if you could please add support for the EZ Flash 3-in-1 (which is labelled EZ Flash V, but it's...

USB-C to 1541-II Power Adapter Low Voltage

1

Hi Stefan, sorry to bother you again. I got the power adapters made by JLCPCB (5 PCBs minimum, of course) and had them assembled because I can't do SMD work...

USB-C to 1541-II Power Adapter Case Modification Request

2

Hi Stefan, Just wondering if you could please modify the STLs for 3D printing the 1541-II power adapter case. I tried to get it printed through JLCPCB (don't currently have...

Compiling ROMs

4

Hi Sven, Thanks so much for this project. I just wanted to ask for specifics on compiling the ROMs because to be honest, I'm having trouble following the explanations in...

"Sketch too big" with all modules enabled

8

### OSCR firmware version 13.1 ### OSCR hardware version HW5 Rev6 ### Attach OSCR_LOG.txt file here _No response_ ### System used all/none/doesn't matter ### Describe the issue. I'm trying to...