TIS-Stefan
TIS-Stefan
Hello Most cameras have a color correction matrix. The use of this matrix can be enabled, if the cameras are used with USB3Vision and GigEVision by the aravis library. If...
Did you also use -DBUILD_ARAVIS=ON ? You may refer to https://www.theimagingsource.com/documentation/tiscamera/building.html for the cmake paramters. Stefan (its not "Mr", because "Stefan" is my surname :-) )
What should I call you then? "Stefan" is just sufficioent. You are welcome! Which camera model do you use? USB3Vision is supported by USB3 cameras only. Not on the USB...
The DFK 37BUX178 should be shown with tcam-ctrl -l twice. After you change the cmake parameters as mentioned above, building and installing tiscamera. Stefan
Hello this is weird. Please reboot your computer. Then enter on the terminal gst-launch-1.0 serial=10910616-aravis ! videoconvert ! ximagesink. Does this show an image? Stefan
Hello Sorry, my fault I missed the "tcambin" gst-launch-1.0 tcambin serial=10910616-aravis ! videoconvert ! ximagesink. Stefan
We know, that aravis is working. Now it is time to try tcam-capture again and seen, what is happening. Maybe we can solve the speed issue. On my computer it...
Yes. It is an old Core i5 with Ubuntu 20.04. Does tcam-capture show your camera with Aravis now?
Hmm. Did you check the exposure time? It should not be too long. Stefan
I give up. I do not get as much images as expected from the camera using Aravis. Only 50 instead of 60 fps. However, tcam-capture will hang, if you change...