T-Mosher
T-Mosher
I'm curious, how are you physically doing the interconnects? Are you using one of the white plastic breadboards, or are you hard-wiring the pins? I've found the DS one-wire sensors...
_the funny thing is..once it failed on pin A0 (for example) i could never get it to work on A0 again…if i kept moving it around (the data line that...
Follow-ups: The NINA firmware has been updated. I added some other sensors, they update at different intervals. The "WiFi won't reconnect" issue happens regardless of how many sensors are configured....
I did not cut the trace, because the Titano tutorial page has this note in a big blue box: _Unlike the original PyPortal, the I2C connector is level shifted to...
I'll try that test build shortly. Thanks for your support!
I just loaded that test build, I'll post back if there are results. Note that my wifi has been behaving well for the last few days, so I haven't had...
The "went offline" issue did happen with the test build. Here's what the serial port is doing after the issue (I was not logging when it happened). Sensor 0x40 Voltage:...
Will install that this evening.
Ok, I have the corrected one installed now.
Seems to be working. Just to verify, is this what you expect to see on the serial port? Sensor 0x40 Voltage: 4.14 v Sensor 0x40 Current: 69.70 mA PUBLISHING ->...