StillVoidingWarranties
StillVoidingWarranties
I just tried to connect with usb debugging enabled. On plugging in the amp there is ``` [ 4.647294] [00009504] libusb: debug [linux_get_device_address] getting address for device: 1-7 detached: 0...
I am sorry but I don't know how to log USB traffic except for what I have posted above. If you could provide me with a test version I will...
Ok, thank you very much. I will look into this in a bit.
Ok, here is what I found. First try: `1c 01 05 00 13 00 01 00 00 00 00 00 00 00 00 00 9b 00 00 00 00 00...
I have tried each of the 24 presets because they result in different bytes being sent. These are organized in 3 banks: 1 - 8: Factory presets (amber bank) 9...
Yes, this looks plausible, I think for the first try I used the 3rd model in the 3rd bank which would be #19. BTW: The amps of the Bronco 40...
Sadly, the Bronco's 59 Bassman preset does not seem to work. Strangely, I get different IDs without changing the preset. The first one (Rumble) was reported as 0, 71, 171,...
Error ids vary wildly even after reboot or closing and reopening Plug.
I read your [documentation](https://github.com/offa/plug/blob/master/doc/Technicalities.md) and the Bronco's amp name packets (0x1c 0x01 0x04) seem to differ from that as the Bronco sends the slot number as the 5th byte, not...
> Did your test with the log attached fail with a 0 too? The amp packet seems to use model 0x9a there. I didn't remember so I redid the test....