StevenCellist
StevenCellist
### Summary Display the application downlink frame counter as well as the network downlink frame counter in the device console, next to the uplink frame counter. ### Current Situation Currently,...
Hi Robert, I would like to see VOC calculation added to the these drivers. I would like to use this issue to discuss calibration and calculation. Yesterday, the Extech VFM200...
Due to a slight bug introduced in one of my recent patches, I decided after conferring with @HeadBoffin to shift around some of the logic around session restoring / activation....
### Summary Math rules strike again - there appears to be a minor re-encoding mistake on the RSSI field in the `uplinkMetadata` of `RelayForwardUplinkReq` that results in the forwarded RSSI...
### Summary Upon configuring the Forwarding Limitations through the CLI, the NS sends `ConfigureFwdLimitReq` to the relay. The contents of this MAC command reveal that TTS by default sets the...
### Summary Instead of requiring to configure the served device's second channel manually, automatically link it to its serving device (relay). ### Current Situation The user is required to manually...
### Summary I would like to see a (CLI) option to disable or remove the second channel of a relay. ### Current Situation The second channel is disabled by default,...
### Summary The payload of the Relay MAC command `NotifyNewEndDeviceReq` is not correctly formatted/parsed on TTS. ### Steps to Reproduce 1. Register two devices on the console on LW v1.0.4....
Something that bothered my for quite a while is the fact that hexbin locations move around every time you zoom in or out. It turns out that the locations where...
### Summary Create a console interface for managing Relays and Served Nodes, where among others served nodes can be tied to Relays, second channel can be configured, Relay WoR rate,...