Stephanie

It would be easy enough to do both. Have the footprint for the onboard supply, but a header to use a module. Pololu sells high quality modules. But their pinout...

In this case it's likely better to have the 3.3v voltage regulator on the expansion board, because the 3.3v is being generated on the ESP32 board and not the 6-Pack...

I made a fork of the design here: https://github.com/StephS/6-Pack_CNC_Controller/tree/Kicad-v1p8s/versions/V1p8s It includes the split VMOT along with some layout changes. I've already had 5 boards made, but I need to buy...

The limiting factor will be the capacitors for the stepper drivers, and the stepper drivers themselves. That's one of the things I need to verify on the BOM. The other...

So I took a quick look, and the result is that the stock capacitors are 330uF @ 50v. This is why the 40v max rating. I looked for replacement capacitors...

Completely agree. And I checked the biqu website, and while the driver states they support up to 60v, 56v is the recommended max. Looking at the TMC5160 datasheet, I have...

Where is that? On Jun 8, 2013 12:25 AM, "midopple" [email protected] wrote: > Hi, > > Please merge to the experimental Version. > > Thanks > > — > Reply...