David Hawley

I am using a GCode file to implement the Z-Probe macro. The problem is, when I run it from the Web, the file is repeated endlessly. Ending the file with...

I am using Wild Web Midi with Verovio MEI viewer. The player clicks and pops, and I have narrowed down the problem to Wild Web Midi streaming the MIDI (if...

This what I see in the browser (and the server too): Streamy.toString() => "function streamy() { }" What could be going wrong? yuukan:[email protected] [email protected] [email protected] [email protected] etc.

The MPU-6000 MPU-6050 Register Map and Descriptions Rev 4.2 doesn't match the code (which appears to work, at least on a GY-521 with an IC labeled as MPU6050), but looks...

The output signal's bit length for WS2811 is 1.25uS in high speed mode, but the FTDI is putting out 1.5uS as shown on a logic analyzer. The allowable jitter is...

I'm trying to use this on the ESP32-C3 SuperMini, using PlatformIO, and get the above missing function error. Test file is the usb_test.ino My config: [env:esp32-c3-devkitm-1] platform = espressif32 board...

### Version 2.1.17 ### Hardware / Firmware GRBL 1.1 ### What happened I have written software to use a PS4 gamepad+Bridge+OLED as a multiple UGS instance WiFi pendant using the...

Add callback to allow Static IP per SSID in WiFiMulti

7

Callback before WiFi.begin allows user to configure selected SSID.

I have a http-proxy server using connect in order to support body-parser. I would also like to proxy WebSocket requests ws://...., but the function in connect.use(fn) doesn't see requests from...

Possibly aka Super Mini NRF52840. These are the boards that pop up on AliExpress, and they are fairly inexpensive.