SkyhawkXava

Same here. Can't add to a group and binding doesn't work. z2m version: 1.42.0-2 zigbee-model: RDM004 firmware-Date: 20220510 firmware-Version: 2.60.16 Btw: This device is not listet in the ota section.

I have now found a solution: First, the Cluster “Groups” must be bound to the coordinator. After that, the required steps can be carried out. But: Dimming (hold button) is...

_fkuiper wrote:_ > After a lot of try-and-error I found out that: > > * You do need to add the switch to the group! Trigger the switch right after...

_hatti75 wrote:_ > The binding works indeed. But if the bound lamp is triggered by something else, I have to push the switch twice. The RDM001 and RDM004 behave differently,...

I modify only via groups, as well. I use only push switches. @fkuiper: On which firmware-date and -version are your RDM001- and RDM004- Switches?

I do think it’s due to the newer firmware version. @hatti75 has the latest 2024 firmware version on both revisions and obviously, both revisions (RDM001 and RDM004) have the issues.

No Solutoon yet. Is there a possible way or workaround in z2m?

I installed the new firmware version 1.0.44 ([changelog](https://ww8.ikea.com/ikeahomesmart/releasenotes/releasenotes.html)) (firmware date: 20240523). But unfortunately, the problem still persists.

Unfortunately, the problem still persists. Is there a way to work around it? Has anyone listened in on the commands (via sniffer) of the Hue Wall Switch Module?