Sineos

Just for future reference: Flashed a SKR 1.4 Turbo with @ardiehl Bootloader, using a USB to TTL adapter: **Things needed:** * USB to TTL adapter, e.g. https://www.amazon.com/dp/B075N82CDL * Some Jumper...

> 4. Reset the board while holding the contact (Nr. 3) > Does the jumper in the picture mean blue? Not sure that I understand the question: - To get...

> How do you build the project? Didn't try under Windows but in Linux it builds nicely. Probably you could use the Ubuntu that can be integrated into Windows 10...

If you build on Debian / Ubuntu on a x86 architecture you will need: `apt install build-essential gcc-arm-none-eabi` You need to x-compile for arm.

Can confirm. Seeing the same behavior

I did some more experiments and the results are really strange. 1. Windows, Issue #47 2. Windows, self compiled, commit https://github.com/Yixin-Hu/TetWild/commit/f6ca5d970f151bd57fbec22df9dfe02932e94555 3. Windows, unknown source The following three images from...

Thanks for coming back to this @Yixin-Hu > What do you mean by "unexpected"? I tried different combination of parameters including but not limited to: - default - `-l 1...

Thanks for coming back to this. > Do you know C basics and would like to help out with the practical side of things? I'm not much of a developer....

I got hold of a v2. Indeed it is a ESP8285. The MCU module reads TYWE2S. The silkscreen and model number on the PCB (SC500WSC-KP3211) is identical. Looks like they...

Flashed OpenBK and it is working so far:  From my point of view, a minimal Roller Shutter support would be: * Make sure both relays are off at boot...