ShaviTF
ShaviTF
Hi... Is there anything new on this subject?... the truth is that it is a very interesting feature that could make the use of RustDesk take off as a real...
Hello... first of all, thank you for the work you are doing and for taking the trouble to help us... 1. About the MCU is the STM32F103C8T6. I have been...
I am using UART, I don't have SWD programmer. I have tried programming several times and there is no difference. I've also tried disabling WatchDog (WDG_SW) with the "Flash Loader...
Ok... now finaly i could got into the application, but, although it does record data, the graph is not shown, that is, I can enter the menus and if I...
Ok... The only read i get is: Adc : Asked for fq=1000 got fq=1000 intDiv:1 int Frac=6464 And then it hangs immediately
No problem. For sure i will help you... in the real you are helping me :D
Now as you say goes to calibration at start, but hangs at "-processing-" again. Terminal output is similar: Adc : Asked for fq=1000 got fq=1000 intDiv:1 intFrac=6464 Setting new GainRange=0
New output: Adc : Asked for fq=1000 got fq=1000 intDiv:1 intFrac=6464 Setting new GainRange=0 Starting ADC... keeps hanging on -processing-
Ok...sorry for the late response...I was out all day... It seems that now there is more information. I enclose the complete trace since the equipment starts. - Regarding whether the...
I think we've taken a step backwards... The new output: Setuping up DSO... 0: R=18 overSampling=0 1: R=36 overSampling=0 2: R=90 overSampling=0 3: R=180 overSampling=0 4: R=360 overSampling=0 5: R=900...